Dishes of ground project mud, steel of China, fall into and explain?
About heavy to help CSC study track geological drilling analysis report made at the problem of draining off water narrate? .
3.1 drilling results now; The thickness is about 70 centimeters for the way of the factory, it is yellowish-brown powder quality clay to 3.6 metres, it is the grey powder quality clay to the powder quality fine sand to the depth of getting into in the powder quality clay. The steel primitive track design drawing while consulting, its cube side designs and contains (lay living in) The stone and gravel of the stove are each, grade mix layer and line cut layer, total thickness invite 1m altogether. Is it well up mud material analyse it belong to getting pale brown powder quality clay to gather live.
Cheng Da; Therefore study and judge, the material that the track wells up the mud should belong to the pale brown powder quality clay, unless it distribute it invite 1m office to the earth's surface, the thick to last 2.5m,but may because influence of loading not repeated, own to is it to the earth's surface 0.8m office, is it gush out the situation in ground to have to pollute upwards.
It is a hundred million in weight; The thickness is about 70 centimeters to study and judge and depend on the way of the factory, it is yellowish-brown powder quality clay to 3.6 metres, it is the grey powder quality clay to the powder quality fine sand to the depth of getting into in the powder quality clay. Contrast the steel primitive track design drawing while consulting, its cube side designs and contains (lay living in) The stone and gravel of the stove are each, grade mix layer and line cut layer, total thickness invite 1m altogether. One layer of density of the above-mentioned structure is received at bottom, the track load causes the wheel to press the shock wave, therefore produce (shoulder the factor of pressing etc., thickness is about 70 centimeters in one, space wheel pigeonhole shock wave but is it press angry exchange well up mud thing, pump the muddy water like pump principle Pu to shoulder) The fine sand swirl form of powder quality infiltrates, it well up it wash melt by earth,it is if shouldering, if pressing, to suck is loose to there is no stove stone gravel each and dish of density to cut layer the occupied and welling up by mud material powder quality clay not pale brown not to produce.
It is a hundred million in weight; Think that dispelling the track load causes the wheel to press the shock wave to fastens, can improve and well up the mud and material, because what there is no shock wave to fasten preaches to isolate, the structure of density of powder quality clay is not full of cracks, powder quality fine sand have swirl form wave fasten difficult to infiltrate while being easy, is it dispel shock wave is it can keep natural physical phenomenon know mud fall into to fasten to try one's best.